When You Hit Steel and Thick Concrete, the Small Grinder Is Done
2350W that doesn't slow under load, cutting up to ~70mm deep with a fresh 230mm disc. Backed by the DX35 warranty and fast Hungarian delivery - so the same machine you saw elsewhere arrives with real support behind it.
2350W
Doesn't slow
under load
under load
Soft-start · no kick
Brushes swap from outside
230mm · cuts ~70mm deep
Safety switch
The graveyard in your workshop
It Was Never You. It Was the Machine.
You didn't quit. Your tools did. Look at what's already piled up in the corner - and why not one of them was built to finish this renovation.
The little 125mm grinder
Physically can't reach through old rebar or a thick concrete threshold. Wrong tool, not wrong hands - a small disc simply can't cut that deep.
The cheap big grinder that bogs down
The second you push it into steel it slows and strains. Underpowered by design - it was never going to hold torque under real load.
The one whose soft-start electronics died
Kicked on start-up, then the board gave out. Cheap electronics, not your fault - built down to a price, not up to the job.
The one you replaced the brushes on twice
And the third time the brushes were buried inside so deep it was cheaper to bin the whole machine. Sealed to be disposable.
That's exactly why a 2350W machine with carbon brushes you swap from the outside exists - so the next tool in your workshop is the last one you buy for the job.
On the jobsite
Watch It Cut, Break and Wall-Slot
Real renovation clips - the disc holding power through steel, breaking a concrete threshold, and slotting a wall with the handle rotated.
Built not to quit
Every Reason It Won't Die on You
Power that holds, electronics that survive, and control features that put a 230mm machine safely in your hands.
2350W that doesn't slow under load
Push it into a steel beam or thick concrete and it holds torque instead of bogging down - the whole reason to move up from a small grinder.
Soft-start - no kick, no blown fuse
The disc ramps up gradually, so the machine doesn't lurch on trigger pull and won't trip your household breaker on start-up.
Carbon brushes swap from the outside
When the brushes wear, you replace them yourself from an external cap - no teardown, no binning the whole machine like a sealed cheap one.
Anti-vibration side grip
The dampened auxiliary handle soaks up the shudder of heavy cutting so your hands and wrists aren't wrecked after a long session.
Rotatable rear handle
Turn the main handle to keep a natural grip on vertical wall cuts - no twisting your wrist to slot a doorway into brick or block.
Safety switch & tool-free guard
A trigger safety stops accidental starts, and the Fast Click guard adjusts by hand - plus a ball-joint cable that stays out of the cut.
230mm big flex vs 125mm small flex
Why the Size Matters for This Job
A small grinder is fine for edges and light work. When the material gets thick, only the big flex reaches through it - here's what that looks like.
1
Reach deep into steel a small disc can't
A fresh 230mm disc cuts up to ~70mm deep. That's the depth an old steel beam or thick rebar needs - a 125mm disc simply runs out of blade before it gets through.
~70mm cut depth
2
Break through thick concrete without stalling
Score the slab and let the 2350W torque feed through. The motor holds its speed instead of bogging - so a concrete threshold or old floor comes apart in one pass, not ten.
2350W · holds under load
3
Slot a doorway into a brick wall
Rotate the rear handle and cut a clean vertical channel for a new doorway. The natural grip keeps your wrist straight through a long vertical run - the kind of cut a small grinder can't even attempt.
Rotatable handle
Metal Fabricator
The Class of Machine Trades Reach For
On real demolition and steel-cutting work, tradespeople spec a 2350W / 230mm machine - one that holds its power under load and keeps cutting when a lighter tool would stall. That's the class the DX35 Power+ is built to, with the rugged Caterpillar name behind it.
Holds power under load - the 2350W motor doesn't slow when it hits thick material.
Serviceable by design - externally-replaceable carbon brushes keep it working, not landfilled.
Full 230mm cutting reach - up to ~70mm deep, the depth heavy cuts actually need.
Illustrative professional model shown.
Renovators & tradesmen
What They Say After the Hard Cuts
★★★★★
4.8 average · 1,200+ reviews
★★★★★
Cut through the old steel gate posts without slowing once. Finally the right tool.
Zoltán K.
Self-renovation · cut old steel gate
Verified buyer
★★★★★
Bought it for a concrete floor demo in the old house. It just powers through the slab where my old machine would bog and stall. No fuse trips either.
Attila M.
Weekend DIY · concrete floor demo
Verified buyer
★★★★★
Soft-start is the real deal - no kick when you squeeze the trigger, and my wrists survive a full afternoon thanks to the side grip.
Péter Sz.
First big grinder · nervous about the size
Verified buyer
★★★★★
Kisiparosként napi szinten nyúzom. Négy hónapja megy, kefét egyszer cseréltem, kívülről, két perc. Bírja.
Gábor T.
Small tradesman · daily use 4 months
Verified buyer
★★★★☆
Cuts everything I throw at it and the power is there. Only honest note: at 5.7 kg it's heavy for overhead work, so plan breaks. For floor and wall cuts it's perfect.
István B.
Renovator · mixed steel & concrete
Verified buyer
★★★★★
Worked out cheaper than getting a builder in for the wall cut - and it's mine forever now. Ordered, arrived in two days, real support behind it.
Norbert V.
Grant renovation · doorway wall cut
Verified buyer
The math of doing it yourself
One Tradesman Visit Costs More Than the Machine
Right now tradesmen are booked out for months and building labor keeps climbing - and the renovation grant rewards the work you do yourself. So the real comparison isn't another grinder. It's what you'd pay someone else.
Months
Typical wait to book a tradesman for the job
+5.7%
Rise in building labor prices, 2025
0 Ft
What every cut after the first one costs you
Pay a tradesman once and it's gone. Buy the machine and it finishes every remaining cut of the renovation for free - on your schedule, not someone else's waiting list.
Straight answers
Everything a Renovator Asks Before Buying
Yes. The 2350W motor is built to hold its speed under load instead of stalling - that's the whole reason to move up to a 230mm big flex. A fresh disc cuts up to ~70mm deep, enough for old rebar, steel gates and thick concrete slabs a small 125mm grinder can't reach.
The soft-start electronics ramp the motor up gently, which protects it from the strain that kills cheaper machines. And when the carbon brushes eventually wear, you swap them yourself from an external cap - no teardown and no binning the whole tool like a sealed cheap grinder.
Soft-start means the disc ramps up gradually, so there's no lurch when you pull the trigger. A safety switch stops accidental starts, the vibration-dampened side grip keeps your hands steady, and the rotatable rear handle lets you keep a natural grip even on vertical wall cuts.
CAT power tools carry the Caterpillar heritage of rugged, jobsite-grade equipment. This machine is built to that toughness standard - heavy-duty motor, serviceable brushes, robust housing - and it's backed by warranty so you're covered on build quality.
You're buying more than the box. Here it comes with the DX35 warranty, fast Hungarian delivery from stock, and real support if you ever need it - not a generic reseller page with unclear service. When a heavy tool matters, buying it from a shop that stands behind it is what protects your money.
It takes standard 230mm discs on an M14 mount - cutting and grinding discs are widely available. The machine weighs about 5.7 kg, which is normal for the class; it's ideal for floor, wall and bench-level cutting. For long overhead work, plan short breaks.
[Update with your shipping timeline - e.g. dispatched within 1-2 business days, delivered in 2-4 days across Hungary.] [Update with your return/warranty policy - e.g. 14-day returns and full manufacturer warranty.]
Buy it right
Buy It Right, Finish It Yourself
The machine that powers through the steel and concrete standing between you and a finished renovation - backed by real warranty and fast delivery, so it's the last big grinder you'll need to buy.
Get the Machine That FinishesDX35 warranty · Fast Hungarian delivery from stock