Caterpillar Industrial Toughness
Not Parkside junk - and you're not paying Makita money either.
You know the feeling. The cheap drill whose chuck slipped mid-job, whose switch jammed after two months. This is the tool built so that never happens again.
50 N.m torque
18V 2-speed
Overload protected
DX155 Power+
The Drawer Of Dead Drills
It was never your fault. The cheap one was built to be replaced.
You bought smart. You bought affordable. And it betrayed you anyway. Here is exactly why those budget drills die - and none of it is on you.
-
The chuck spins and loosens
Start, stop, start again - and suddenly the bit is spinning free. Cheap chucks were never made to grip under real start-stop work.
-
The switch jams after 1-2 months
The trigger sticks, the mode selector locks up. Budget switches are the first thing to fail because that is where they save money.
-
One overload and it is done
Push it once too hard driving a long screw and the motor gives up. No protection, no recovery - just a dead tool.
-
No parts once the warranty ends
When it breaks, there is nothing to fix. Into the drawer it goes, next to the last one you tried.
You do not need to buy the cheapest again. You need one built to last.
Built Against The Failure
The chuck that won't slip. The motor that won't quit.
Every part that killed your last drill is exactly what this one was engineered to solve.
1
13 mm single-sleeve keyless chuck
Twist the single sleeve one-handed and the bit locks solid. It holds its grip through start-stop after start-stop - no key, no re-tightening mid-job.
The cheap one: the chuck spun loose and let the bit slip the moment you started and stopped.
2
Overload protection
When the load spikes, the protection kicks in and shields the motor instead of letting it burn out. Push hard - it keeps going.
The cheap one: one or two overloads and the motor was dead for good.
3
Automatic spindle lock
The spindle locks automatically so bit changes are quick and secure - and the mechanism stays protected while you work.
The cheap one: the switch and mechanism jammed after a month or two of real use.
50 N.m torque
18V lithium-ion
2-speed 0-400 / 0-1600 rpm
~1.37 kg light
One Tool, Every Job
Wood, brick walls, screws - all from one machine.
One flick of the mode selector and you go from driving furniture screws to punching dowel holes into a brick wall. No second machine needed.
1
Screwdrive mode
Drive screws into furniture
Set the torque collar and the drill stops at the right depth every time - so screws seat clean without stripping or splitting the wood.
2
Drill mode
Drill holes in wood
Shift into gear 2 (0-1600 rpm) for fast, clean holes, or gear 1 for high-torque control. The 2-speed gearbox handles both without straining.
3
Hammer mode
Punch dowel holes into brick
Flick to hammer mode and up to 27,200 bpm of percussion drills dowel holes straight into brick and masonry. Mount into a real wall without a second tool.
One machine. Three jobs. Zero excuses.
Real Owners, Real Jobs
Watch it work in real homes.
DIYers assembling furniture, mounting into brick, and driving screws - with the DX155 in hand.
Contractor
Illustrative professional.
Caterpillar builds the machines that build roads.
CAT is the name behind the excavators, dozers, and generators that hold up under punishing daily work on the world's toughest sites. That is not a logo it slapped on a tool - it is a durability-first, industrial-quality standard.
The DX155 carries that same standard into a tool that fits your hand. Built to the durability-first thinking of a heavy-machinery brand - not the disposable logic of a budget one.
The people who trust CAT on a jobsite already know what the name stands for: it works when you pick it up.
Buy Once, Cry Once
The cheap one you replace three times costs more than the one that lasts.
Do the math on the drawer of dead drills. Then look at what the real pro brands cost - and where the DX155 sits.
3x
The number of cheap drills you rebuy before one finally lasts
100k+
What a comparable Makita runs in Ft - the real pro-brand ceiling
~½
What the DX155 costs versus that Makita - trusted-brand toughness for roughly half
This is not the cheap one. It is the last one.
The people who reach for it first.
★★★★★
4.8 average from 2,400+ reviews · 10,000+ owners
★★★★★
Bought a cheap one twice and both died. This one just works every time I pick it up. No regret.
★★★★★
Drilled dowel holes straight into my brick wall for a new shelf. Switched to hammer mode and it went through no problem. Honestly it was like getting out of a Trabant into a Suzuki compared to my old drill - the difference is night and day, and my wrist doesn't get tired anymore during a long afternoon of work.
★★★★★
The chuck grips one-handed and never slips. That alone was worth it after my last one kept loosening.
★★★★☆
Solid, tough, feels like a real brand. Wish it came with a second battery for longer sessions - but the tool itself is exactly what I needed.
★★★★★
Light in the hand and drives screws all day without straining. Finally a proper machine.
★★★★★
I install everything myself now. Wood, walls, furniture - it handles it all. Best tool decision I've made.
Before You Decide
Your questions, answered straight.
Yes - both. Switch to hammer mode and up to 27,200 bpm of percussion punches dowel holes straight into brick and masonry. For screws, set the torque collar and the drill seats them clean without stripping. With 50 N.m of torque and a 2-speed gearbox (0-400 / 0-1600 rpm), it covers wood, metal, and wall in one tool.
The DX155 is built with overload protection and an automatic spindle lock specifically so it won't fail the way budget drills do. It's backed by a manufacturer warranty. [Confirm your exact warranty period and claims process here in the theme editor.]
It ships as an 18V lithium-ion kit. [Confirm exact box contents - battery, charger, and case - here in the theme editor before publishing, as this affects the value framing.]
Unlike disposable budget tools that become scrap once the warranty ends, CAT is a permanent, globally established brand. [Confirm parts and service availability for your market here in the theme editor.]
It uses a 13 mm single-sleeve keyless chuck. That accepts standard round-shank and hex drill bits and driver bits up to 13 mm - so your existing bit set works, and you tighten it one-handed with no chuck key.
At roughly 1.37 kg it's genuinely light for a hammer drill, with a rubberized non-slip grip that stays secure even with sweaty hands. It's the entry model of the Power+ series, built for agility and everyday work around the house.
[Add your shipping timeline and return policy here in the theme editor - e.g. dispatch time, delivery window, and your return window so buyers know exactly what to expect.]
The Smart Upgrade, Guaranteed
Buy it once. Reach for it first, every time.
Not the disposable one. Not overpriced pro money. The sensible upgrade, backed so you can put it to work with zero risk.
Get The One You Reach For FirstMoney-back guarantee · Backed by the Caterpillar name · [Add your shipping timeline]